J 시리즈 (대형 변위 유형 진동 시험기) > 연구기기

본문 바로가기

연구기기

연구기기

IMV J 시리즈 (대형 변위 유형 진동 시험기)

페이지 정보

profile_image
작성자 최고관리자
댓글 0건 조회 809회 작성일 22-10-21 18:48

본문

심한 충격파 테스트에는 큰 속도와 변위가 필요합니다. J 시리즈는 i 시리즈와 동일한 사용 편의성과 내구성으로 큰 속도와 변위를 지원하는 시스템입니다.


대형 변위 유형 진동 시험기

J 시리즈

J 시리즈 J260/SA7M(수평 보조 테이블 포함)

J 시리즈는 또한 큰 속도와 큰 변위의 테스트를 지원합니다
.
심한 충격파 테스트에는 큰 속도와 변위가 필요합니다.
J 시리즈는 i 시리즈와 동일한 사용 편의성과 내구성으로 큰 속도와 변위를 지원하는 시스템입니다.

 

특징

■넓은 최대 테스트 범위(라인업의 최대값)
◎최대 사인파 속도 2.4m/s ◎최대 충격파 속도 4.6m/s ◎최대 변위 100mmp-p
■특허받은 어퍼 서포트 메커니즘 PS 가이드
표준으로 평행 슬로프 가이드
■ 모든 모델은 항온 및 습도 챔버 (탱크 바닥에 직접 연결)로 직접 도킹 할 수 있습니다.

시편 장착 나사 위치(단위: mm)

시편 장착 나사 위치





Specifications


J-series


System Model Unit J230/SA3AM J230S/SA7AM J240/SA4AM J240S/SA6HAM J250/SA5AM J250/SA6AM J260/SA7AM J260S/SA16HAM
System Specifications Frequency Range Hz 0－3000 0－3000 0－2400 0－2400 0－2200 0－2200 0－2600 0－2000
Rated Sine kN 16 16 24 24 35 40 54 54
Force Random kN rms 16 16 24 24 35 40 54 54
　 Shock
kN
40 40 55 70 70 80 108 196
Maximum Acc. Sine 　 941 888 923 857 777 888 857 857
Random 　 658 622 646 600 544 622 600 600
Shock 　 2,000 2,000 2,000 2,000 1,555 1,777 1,714 2,000
Maximum Vel. Sine m/s 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
Shock m/s peak 2.4 3.5 2.4 3.6 2.4 2.4 2.4 4.6
Maximum Disp. (Sine) mmp-p 100 100 100 100 100 100 100 100
Maximum Travel mmp-p 120 120 120 120 120 120 116 116
Maximum Load kg 300 300 400 400 600 600 1,000 1,000
Power Requirements kVA 28 38 38 52 53 57 86 127
Breaker Capacity A 100 150 150 200 200 200 300 500
Vibration Generator Model 　 J230 J230S J240 J240S J250 J250 J260 J260S
Armature Mass kg 17 18 26 28 45 45 63 63
Armature Diameter φmm 200 200 290 290 440 440 446 432
Allowable Eccentric Moment N・m 700 700 850 850 1,550 1,550 1,550 1,550
Dimensions Width mm 1,124 1,124 1,234 1,234 1,463 1,463 1,527 1,632
Height mm 1,079 1,079 1,145 1,145 1,301 1,301 1,319 1,388
Depth mm 850 850 890 890 1,100 1,100 1,100 1,130
Shaker Body Diameter φmm 630 630 720 720 860 860 920 920
Mass kg 1,800 1,800 2,400 2,400 3,500 3,500 4,100 5,000
Power Model 　 SA3AM-J30 SA7AM-J30S SA4AM-J40 SA6HAM-J40S SA5AM-J50 SA6AM-J50 SA7AM-J60 SA16HAM-J60S
Amplifier Maximum Output kVA 23 30 34 40 50 57 70 76
　 Dimensions Width mm 580 580 580 580 580 580 580 1,740
　 Height mm 1,750 1,950 1,750 1,950 1,950 1,950 1,950 1,950
　 Depth mm 850 850 850 850 850 850 850 850
　 Mass kg 330 500 440 1,000 880 910 1,000 3,000
Controller Vibration Controller 　 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2
Cooling Cooling Method 　 Air cooling Air cooling Air cooling Air cooling Air cooling Air cooling Air cooling Air cooling
Blower Dimensions Width mm 606 606 707 707 1,057 1,057 1,328 1,328
Height mm 1,315 1,315 1,531 1,531 1,841 1,841 2,410 2,410
Depth mm 891 891 917 917 1,125 1,125 1,097 1,097
Mass kg 125 125 210 210 250 250 370 370
Wattage kw 3.7 3.7 5.5 5.5 11 11 15 15
Duct Hose Diameter φ 200 200 200 200 250 250 250 250
　 　 　 　 　 　 　 　 　 　 　 　 　
*Random force ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements. 　 　
*Power supply: 3-phase 200/220/380/400/415 V (A74 is only AC380/400/415 V), 50/60 Hz. A transformer is required for other supply voltages. 　 　
*Breaker capacity for AC 200 V. 　 　 　 　 　 　
*Above 2000 Hz, the force rolls-off at a rate of -12 dB/oct. 　 　 　 　 　 　
*Specification above applies to 60 Hz. Dimensions change for 50 Hz. 　 　 　 　 　 　
*An export license is required for exporting the shaker system of over 50 kN sine force. 　 　 　 　 　 　
*The specification shows the maximum system performance. For long-duration tests, system must be de-rated up to 70%.
Continuous use at maximum levels may cause failure. Please contact IMV if your system operates at more than 70%.
*For random vibration tests, please set the test definition of the peak value of acceleration waveform to operate at less than the maximum acceleration of shock. 　 　
*Frequency range values vary according to the sensor and vibration controller. 　 　
*Armature mass and acceleration may change when a chamber is added. 　 　 　
*Mass and dimensions may change for CE-marked systems.


J-series (ECO) 


System Model Unit J230/EM3AM J240/EM4AM J250/EM5AM J250/EM6AM J260/EM7AM
System Specifications Frequency Range Hz 0－3000 0－2400 0－2200 0－2200 0－2600 　
Rated Force Sine kN 16 24 35 40 54 　
Random kN rms 16 24 35 40 54 　
Shock kN 40 55 70 80 108 　
High Velocity Shock
kN 30 48 68 77 96 　
Maximum Acc. Sine 　 941 923 777 888 857 　
Random 　 658 646 544 622 600 　
Shock 　 2,000 2,000 1,555 1,777 1,714 　
High Velocity Shock 　 1,764 1,846 1,511 1,711 1,523 　
Maximum Vel. Sine m/s 2.4 2.4 2.4 2.4 2.4 　
Shock m/s peak 2.4 2.4 2.4 2.4 2.4 　
High Velocity Shock m/s peak 3.5 3.5 3.5 3.5 3.5 　
Maximum Disp. Sine mmp-p 100 100 100 100 100 　
High Velocity Shock mmp-p 100 100 100 100 100 　
Maximum Travel mmp-p 120 120 120 120 116 　
Maximum Load kg 300 400 600 600 1,000 　
Power Requirements kVA 28 38 53 57 86 　
Breaker Capacity A 100 150 200 200 300 　
Vibration Generator Model 　 J230 J240 J250 J250 J260 　
Armature Mass kg 17 26 45 45 63 　
Armature Diameter φmm 200 290 440 440 446 　
Allowable Eccentric Moment N・m 700 850 1,550 1,550 1,550 　
Dimensions Width mm 1,124 1,234 1,463 1,463 1,527 　
Height mm 1,079 1,145 1,301 1,301 1,319 　
Depth mm 850 890 1,100 1,100 1,100 　
Shaker Body Diameter φmm 630 720 860 860 920 　
Mass kg 1,800 2,400 3,500 3,500 4,100 　
Power Amplifier Model 　 EM3AM-J30 EM4AM-J40 EM5AM-J50 EM6AM-J50 EM7AM-J60 　
Maximum Output kVA 23 34 50 57 70 　
Dimensions Width mm 580 580 580 580 1,160 　
Height mm 1,750 1,750 2,100 2,100 1,950 　
Depth mm 850 850 850 850 850 　
Mass kg 380 490 930 960 1,400 　
Controller Vibration Controller 　 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 　
Cooling Cooling Method 　 Air cooling Air cooling Air cooling Air cooling Air cooling 　
Blower Dimensions Width mm 708 707 1,169 1,169 1,328 　
Height mm 1,421 1,531 2,123 2,123 2,410 　
Depth mm 782 917 799 799 1,097 　
Mass kg 140 210 280 280 370 　
Wattage kw 3.7 5.5 11 11 15 　
Duct Hose Diameter φ 200 200 250 250 250 　
　 　 　 　 　 　 　 　 　 　 　
*Random force ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements.
*Power supply: 3-phase 200/220/380/400/415 V (A74 is only AC380/400/415 V), 50/60 Hz. A transformer is required for other supply voltages.
*Breaker capacity for AC 200 V. 　 　 　 　 　 　 　
*Above 2000 Hz, the force rolls-off at a rate of -12 dB/oct. 　 　 　 　 　 　 　
*Specification above applies to 60 Hz. Dimensions change for 50 Hz. 　 　 　 　
*An export license is required for exporting the shaker system of over 50 kN sine force. 　 　 　 　 　
*For high velocity option 　 　 　 　
*The specification shows the maximum system performance. For long-duration tests, system must be de-rated up to 70%.
Continuous use at maximum levels may cause failure. Please contact IMV if your system operates at more than 70%.
*For random vibration tests, please set the test definition of the peak value of acceleration waveform to operate at less than the maximum acceleration of shock.
*Frequency range values vary according to the sensor and vibration controller.
*Armature mass and acceleration may change when a chamber is added. 　
*Mass and dimensions may change for CE-marked systems.
견적문의

회원로그인

  • 상호 : 네오닉스시스템
  • 대표자 : 방원철
  • 사업자등록번호 : 620-09-34535
  • 관리책임자 : 관리팀 손은재
  • 44679 울산광역시 남구 신정로203번길 61 502호
  • TEL : 052-288-6801
  • FAX : 052-288-6802
  • E-mail : neonix@neonixsystem.com
Copyright © 2022 NEONIX. All rights reserved.